Service of the Infiniti QX4 since 1996 of release
1. Introduction
2. Maintenance instruction
3. Routine maintenance
4. Engine
5. Cooling system and heating
6. Feed and control systems
7. Systems of start and charge
8. Transmission line
9. Brake system
10. Suspension bracket and steering
10.1. Specifications
10.2. Assessment of the general condition of components of a suspension bracket and steering of the car
10.3. Check of a state and replacement of spherical support of a forward suspension bracket
10.4. Check of a condition of steering drafts
10.5. Removal and installation of the cross lever of a forward suspension bracket
10.6. Adjustment of a pretightness of stupichny bearings of forward wheels
10.7. Removal, check of a state and installation of screw springs and rack-mount assemblies of a forward suspension bracket
10.8. Removal and installation of stupichny assembly and rotary fist
10.9. Removal, check of a state and installation of the forward stabilizer of cross stability
10:10. Replacement of stupichny bearings
10:11. Check of a condition of shock-absorbers and springs of a back suspension bracket
10:12. Removal and installation of components and assembly of a back suspension bracket
10:13. Removal, check of a state and installation of levers of a back suspension bracket
10:14. Removal, check of a state and installation of screw springs of a back suspension bracket
10:15. Removal and installation of shock-absorbers of a back suspension bracket
10:16. Removal and installation of the back stabilizer of cross stability
10:17. Removal, check of a state and installation of a cross jet bar of a back suspension bracket
10:18. Pumping of a hydraulic path of the steering drive
10:19. Checks and adjustments of a steering wheel
10:20. Check of effort of resistance to sliding of a lath of the steering mechanism
10:21. Adjustment of torque of a provorachivaniye of the leading gear wheel of the steering mechanism
10:22. Check of hydraulic pressure of GUR
10:23. Adjustment of effort of a tension of a belt of the drive of the steering pump
10:24. Removal and installation of reduktorny assembly
10:25. Removal and installation of assembly of the steering mechanism
10:26. Removal and installation of the steering pump
10:27. Removal and installation of a steering wheel
10:28. Removal and installation of assembly of the combined understeering switches
10:29. Removal and installation of the lock of ignition / blocking of a steering column
10:30. Removal, check of a state and installation of a steering column
10:31. Angles of installation of forward wheels
11. Body
12. Electric equipment
 






5d7aa768






10-26-snyatie-i-ustanovka-rulevogo-nasosa.html

10:26. Removal and installation of the steering pump


Design of the steering pump

1 — the Pulley
2 — the Lock ring
3 — the Leading shaft
4 — the Epiploon
5 — the Soaking-up tube
6 — the Sealing ring
7 — Pruzhina
8 — the Valve of management of a stream
9 — the Sealing ring
10 — the Socket
11 — the Copper washer
12 — the Hose
13 — the Bolt
14 — the Arm
15 — the Forward casing

16 — the Sealing ring
17 — the Sealing ring
18 — the Forward plate
19 — Shibera
20 — the Rotor
21 — the Pin
22 — the Cam ring
23 — Sealing laying
24 — the Back cover
25 — the Back arm
26 — the Basic arm
27 — the Adjusting level
28 — the Lock nut of an adjusting bolt
29 — the Adjusting bolt
30 — the Arm of an adjusting bolt

Performance of recovery repair of the steering pump will be reasonable to charge to specialists of car service.


Removal

 PERFORMANCE ORDER

    If you are going to remove a driving pulley, weaken a nut of its fastening. Release adjusting bolts and take off a driving belt. Disconnect a pressure head hose from the pump — try the adjusting angle of connection of a hose. Remove the soaking-up line. Turn out fixing bolts and remove pump assembly.


Installation

 PERFORMANCE ORDER

    Installation is made as it should be, the return to an order of dismantle of components. Remember that all sealing rings will lie down to replacement without fail. Before installation grease new rings of pure ATF. Track that all fixing bolts (including hollow bolts of nipple sockets) were tightened with the required effort. In conclusion make adjustment of a tension of a driving belt (see Adjustment of effort of a tension of a belt of the drive of the steering pump).


"on the page back
10:25. Removal and installation of assembly of the steering mechanism
on the following page"
10:27. Removal and installation of a steering wheel