Service of the Infiniti QX4 since 1996 of release
1. Introduction
2. Maintenance instruction
3. Routine maintenance
4. Engine
5. Cooling system and heating
6. Feed and control systems
7. Systems of start and charge
8. Transmission line
9. Brake system
10. Suspension bracket and steering
10.1. Specifications
10.2. Assessment of the general condition of components of a suspension bracket and steering of the car
10.3. Check of a state and replacement of spherical support of a forward suspension bracket
10.4. Check of a condition of steering drafts
10.5. Removal and installation of the cross lever of a forward suspension bracket
10.6. Adjustment of a pretightness of stupichny bearings of forward wheels
10.7. Removal, check of a state and installation of screw springs and rack-mount assemblies of a forward suspension bracket
10.8. Removal and installation of stupichny assembly and rotary fist
10.9. Removal, check of a state and installation of the forward stabilizer of cross stability
10:10. Replacement of stupichny bearings
10:11. Check of a condition of shock-absorbers and springs of a back suspension bracket
10:12. Removal and installation of components and assembly of a back suspension bracket
10:13. Removal, check of a state and installation of levers of a back suspension bracket
10:14. Removal, check of a state and installation of screw springs of a back suspension bracket
10:15. Removal and installation of shock-absorbers of a back suspension bracket
10:16. Removal and installation of the back stabilizer of cross stability
10:17. Removal, check of a state and installation of a cross jet bar of a back suspension bracket
10:18. Pumping of a hydraulic path of the steering drive
10:19. Checks and adjustments of a steering wheel
10:20. Check of effort of resistance to sliding of a lath of the steering mechanism
10:21. Adjustment of torque of a provorachivaniye of the leading gear wheel of the steering mechanism
10:22. Check of hydraulic pressure of GUR
10:23. Adjustment of effort of a tension of a belt of the drive of the steering pump
10:24. Removal and installation of reduktorny assembly
10:25. Removal and installation of assembly of the steering mechanism
10:26. Removal and installation of the steering pump
10:27. Removal and installation of a steering wheel
10:28. Removal and installation of assembly of the combined understeering switches
10:29. Removal and installation of the lock of ignition / blocking of a steering column
10:30. Removal, check of a state and installation of a steering column
10:31. Angles of installation of forward wheels
11. Body
12. Electric equipment
 












10-20-proverka-usiliya-soprotivleniya-skolzheniyu-rejjki-rulevogo-mekhanizma.html

10:20. Check of effort of resistance to sliding of a lath of the steering mechanism

 PERFORMANCE ORDER

  1. Bring forward wheels of the car into rectilinear situation. Check the level of hydraulic liquid in the tank of the steering pump, in case of need make the corresponding adjustment (see the Head Routine maintenance).
  2. Make sure of absence in a path of air traffic jams, in case of need pump over system (see Pumping of a hydraulic path of the steering drive).
  3. The car also establish to Poddomkratta it on props (see the illustration Scheme of an Institution of Props for fixing of the car in the lifted situation).
  4. Disconnect tips of steering drafts from rotary fists.
  5. Disconnect the lower hinge of a shaft of a steering column from a shaft of the leading gear wheel of the steering mechanism.
  6. Start the engine and let's it work on single turns for warming up of the GUR hydraulic liquid up to the temperature about 60 — 80 °C.
  7. Hook on a steelyard for a tip of one of steering drafts.
  8. Make sure that the steering mechanism is in the central situation and, having pulled for a steelyard, slowly extend draft on distance of 11.11 mm with  a speed about 3.17 mm / page. Consider the maximum indication recorded by a steelyard.
  9. If the result exceeds the limit of admissible range (see Specifications), make adjustment of torque of rotation of the steering mechanism (see Adjustment of torque of a provorachivaniye of the leading gear wheel of the steering mechanism).
  10. If adjustment of torque does not lead to correction of a situation, replace the steering mechanism.


"on the page back
10:19. Checks and adjustments of a steering wheel
on the following page"
10:21. Adjustment of torque of a provorachivaniye of the leading gear wheel of the steering mechanism




5d7aa768