|
4-8-zamena-perednego-salnika-kolenchatogo-vala.html
4.8. Replacement of a forward epiploon of a bent shaft
|
|
The forward epiploon of a bent shaft is put in the case of the oil pump, authors of the present manual recommend to remove the pump previously. |
Removal
|
|
Remove the oil pump (see Removal, service and installation of the oil pump).
|
Having hooked the suitable tool, take an old epiploon from the landing nest in a pump housing. Act carefully — try not to damage sealing walls of a nest. Try to remember adjusting to the poloyezhena of an epiploon.
|
|
|
Installation
|
|
Grease sealing sponges of a new epiploon with pure motive oil.
|
|
Fill an epiploon in a reception nest and by means of a suitable mandrel press it aflush with an external surface of a pump housing.
|
|
|
|
|
As a mandrel the replaceable face head of the corresponding size, or a piece of a pipe of suitable diameter can be used, the mandrel has to rest only against a rigid face surface of an epiploon! |
Further installation is made as it should be, the return to an order of dismantle of components — track that all fixture was tightened with the required effort.
|
|
|
|
