Service of the Infiniti QX4 since 1996 of release
1. Introduction
2. Maintenance instruction
3. Routine maintenance
4. Engine
5. Cooling system and heating
6. Feed and control systems
7. Systems of start and charge
8. Transmission line
8.1. 4-staged automatic transmission
8.2. Transfer case
8.2.1. General information
8.2.2. Removal and installation of the transfer case
8.2.3. Removal and installation of a driving electric motor of the actuation mechanism of the transfer case
8.2.4. Replacement of an oil filter of the transfer case
8.2.5. Replacement of epiploons of an output shaft of the transfer case
8.2.6. Replacement of an epiploon of a rod of switching of the transfer case
8.3. Differentials, power shafts / half shafts
8.4. Driveshafts
9. Brake system
10. Suspension bracket and steering
11. Body
12. Electric equipment
 






5d7aa768






8-2-4-zamena-maslyanogo-filtra-razdatochnojj-korobki.html

8.2.4. Replacement of an oil filter of the transfer case

 PERFORMANCE ORDER

    Turn out fixing bolts and remove an oil filter from the transfer case. Try not to damage the filtering element — track uniformity of an otpuskaniye of fixture.
    Remove a sealing ring — at installation the ring is subject to replacement without fail.


Installation

 PERFORMANCE ORDER

    Grease a new sealing ring with technical vaseline or ATF is fresher. Install the filter on the regular place and evenly tighten fixing bolts with the required effort (7 — 9 Nanometers).


"on the page back
8.2.3. Removal and installation of a driving electric motor of the actuation mechanism of the transfer case
on the following page"
8.2.5. Replacement of epiploons of an output shaft of the transfer case