Service of the Infiniti QX4 since 1996 of release
1. Introduction
2. Maintenance instruction
3. Routine maintenance
4. Engine
5. Cooling system and heating
6. Feed and control systems
7. Systems of start and charge
8. Transmission line
8.1. 4-staged automatic transmission
8.2. Transfer case
8.3. Differentials, power shafts / half shafts
8.4. Driveshafts
8.4.1. General information
8.4.2. Removal and installation of driveshafts
8.4.3. Check of a condition of driveshafts
9. Brake system
10. Suspension bracket and steering
11. Body
12. Electric equipment
 












8-4-2-snyatie-i-ustanovka-kardannykh-valov.html

8.4.2. Removal and installation of driveshafts

 PERFORMANCE ORDER

  1. The car also establish to Poddomkratta it on props (see the illustration Scheme of an Institution of Props for fixing of the car in the lifted situation).
  1. Mark landing position of the driveshaft of rather connecting flange.
  1. At the corresponding complete set turn out bolts of fastening of a basic arm of the central bearing, then release fixture and disconnect a shaft from assembly of the main transfer.
  1. At once after removal of a shaft to a zakuporta an entrance opening in transmission a suitable cap.


"on the page back
8.4.1. General information
on the following page"
8.4.3. Check of a condition of driveshafts




5d7aa768